da_DKen_GB + 45 86 40 78 90 Info@jkt.dk

JKT has developed entirely new and patented
INTELLIGENT AND TOLERANCE-COMPENSATING
tray denesting solutions.


Significant savings of more than 500 % are possible if the difference in the trays’ stacking distances is fully exploited.
Either the end user or the plastic tray producer will benefit from this.

Different
tray
denesting technologies

A1

Tray
denesting technology

A2

Tray
denesting technology

A1 technology

Trays with large stacking distance.
Manufactured and stacked with a
horizontal distance between them.
The stacking distance between the
10 trays shown here is 6.4 mm.

A2 technology

Close stacked trays.
Manufactured and stacked without a
horizontal distance between them.
The stacking distance between the
10 trays shown here is 1.4 mm.

"
'
"
(

A1 technology

A1 tray denesting technology
For denesting of plastic trays manufactured so there is a horizontal distance between the stacked trays.
Also for denesting of aluminium trays.
Tried and tested tray denesting technology.
Over 15 years on the market.

A2 Technology

INTELLIGENT AND TOLERANCE-COMPENSATING. The A2 tray denesting technology was recently developed by JKT for denesting of tightly stacked trays manufactured so there is no horizontal distance between the stacked trays. The A2 technology automatically compensates for the trays’ length, width and centricity tolerances. Tightly stacked trays without a horizontal distance beteween them can now be denested without any errors.

A1

Tray
denesting technology

A1 Technology

A1 tray denesting technology
For denesting of plastic trays manufactured so there is a horizontal distance between the stacked trays.
Also for denesting of aluminium trays.
Tried and tested tray denesting technology.
Over 15 years on the market.

A2

Tray
denesting technology

A2 Technology

INTELLIGENT AND TOLERANCE-COMPENSATING. The A2 tray denesting technology was recently developed by JKT for denesting of tightly stacked trays manufactured so there is no horizontal distance between the stacked trays. The A2 technology automatically compensates for the trays’ length, width and centricity tolerances. Tightly stacked trays without a horizontal distance beteween them can now be denested without any errors.

The A1 and A2 tray denesting tools are integrated in the tried and tested SPEED-DISP tray denesting system.
All mechanical and movable components, wear parts, the drive unit and the transmission parts have since 2003 proved their unsurpassed operational reliability.

The first installations have denested more than 40 million trays from the one and same SPEED-DISP tray denesting machine and have over this period also proven that the SPEED-DISP tray denesting system only needs a minimum of service and mechanical maintenance, compared to all other competing products on the market.

Jysk Konstruktions Teknik has over many years supplied professional tray denesting solutions for industry in Denmark and abroad. Our experience and know-how are today internationally renowned.