da_DKen_GB + 45 86 40 78 90 Info@jkt.dk

Film

Here you can download various films that illustrate how the A2 tray denesting technology works.

A2

Tray
denesting technology

High speed tray denesting

Denesting of closely stacked trays
Speeds from one to 400 trays/min.

Nine different trays manufactured by the same tray manufacturer. Manufactured to different designs. Manufactured by means of different moulds.

Even though the various trays are described as belonging to the same product family, there are numerous variations and differences when the individual trays are assessed, measured and compared.

  • In the data sheet many of the trays have different nominal lengths and widths.
  • In the data sheet many of the trays have different tolerances in terms of their lengths and widths.
  • In the data sheet many of the trays have different centricity tolerances.
  • Several trays exceed the indicated tolerances.
  • Different tray heights.
  • Different tray edge heights.
  • Different stacking distances.
  • Different foil thicknesses.
  • Different foil materials, combinations and colours.
  • Different stacking lug designs.
  • Non-uniformity in the stacking of trays.

Multi tray denesting

  • Three different trays
  • From three different tray manufacturers
  • With differences in the trays’ nominal length and width measurements
  • Three different trays
  • From two different tray manufacturers
  • With large differences in the stacking distance
  • From 3.4 to 1.4 mm.
  • Variations in the trays’ length and width centricity measurements of up to 3.0 mm

In addition, the A2 technology denests trays

  • with provoked stacking errors.
Jysk Konstruktions Teknik has over many years supplied professional tray denesting solutions for industry in Denmark and abroad. Our experience and know-how are today internationally renowned.